Release Agent

TypeIndustrial Release Agent

GradeIndustrial

BaseSilicone / Wax Blend

AvailableBulk & Retail

Release Agent is an industrial mould release formulation used to prevent adhesion between moulded parts and mould surfaces in rubber, PU foam, concrete and composite manufacturing. ISL Chemicals supplies industrial-grade Release Agent for Pakistan’s rubber, plastics, foam and construction industries.

Get a Quote Call Us Now

Quick Specs

Specific Gravity0.780 — 0.900

Flash Point>30°C

Active IngredientSilicone / Wax / PTFE

AppearanceClear to milky white

OdourMild, petroleum or neutral

⚗ Every batch quality-tested by our Chemical Engineer for Sp.Gr before dispatch.

Overview
Technical Specifications
Applications
Handling & Safety
Get a Quote

Product Overview

Release Agent is an industrial mould release formulation based on silicone, wax or PTFE (or blends thereof) in a suitable carrier solvent. It is applied to mould surfaces prior to casting or moulding to prevent adhesion and allow clean, damage-free part release. Release Agents extend mould life, reduce scrap rates and improve production efficiency across rubber moulding, PU foam production, concrete casting and fibreglass/composite manufacturing. ISL Chemicals supplies industrial-grade Release Agent for Pakistan’s rubber, foam, concrete and composite manufacturing industries.

Why Choose ISL Chemicals for Release Agent?

Effective for rubber, PU foam, concrete and composite moulds
Reduces scrap rate and extends mould service life
Clean release – no residue on finished parts
Consistent specific gravity and active content per batch
Bulk drums and retail quantities available
Same-day delivery in Sialkot and Lahore

Technical Specifications

Parameter	Specification
Type	Industrial mould release agent
Active Ingredient	Silicone / Wax / PTFE (formulation dependent)
Grade	Industrial
Specific Gravity	0.780 — 0.900 at 20°C
Flash Point	>30°C (carrier solvent dependent)
Application Method	Spray, brush or wipe onto mould surface
Appearance	Clear to milky white liquid
Odour	Mild, petroleum or neutral
Compatibility	Rubber, PU foam, concrete, fibreglass, composite moulds
Packaging	20L cans / 200L drums / bulk

Applications of Release Agent

Rubber moulding – tyres, seals, gaskets and footwear soles
PU foam moulding – furniture, automotive and insulation foam
Concrete and precast element formwork release
Fibreglass and composite part demoulding
Plastic injection mould release
Die casting and metal moulding release
Tile and ceramic mould release agent

Industries Using Release Agent

⚙️Rubber Manufacturing

🛋️PU Foam & Furniture

🏗️Construction & Concrete

🔩Plastics & Composites

Handling & Safety Information

⚠️

Important Safety Notice Release Agent may be flammable depending on the carrier solvent used. Avoid inhalation of spray mist or vapours during application. Use only in well-ventilated areas. Keep away from heat, sparks and open flames during spraying. Avoid prolonged skin contact and eye exposure. Consult SDS for the specific formulation before use.

Store in tightly sealed containers in a cool, dry area
Keep in a well-ventilated warehouse away from heat sources
Store away from oxidising agents and ignition sources
Keep away from heat and open flames
Recommended storage temperature 10 — 35°C
Keep containers sealed to prevent contamination and
evaporation

Chemical-resistant gloves (nitrile or neoprene)
Safety goggles or splash guard
Adequate ventilation or organic vapour respirator
Protective clothing to minimise skin exposure
Avoid prolonged skin contact and inhalation
Consult Safety Data Sheet (SDS) before handling

Request a Quote for IPA

Fill in your requirements and our Chemical Engineer will respond within hours with pricing and availability.

Prefer to Contact Directly?

📱

info@islchemicals.com

⚗ Our Chemical Engineer responds to all inquiries with exact product specs, pricing and delivery timeline – typically within 2–3 hours during business hours.